Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2020-04-14 12:32
360
Company Profile
By certification [File Integrity]
Contact：mould(Mr.)
Email：
Telephone：
Phone：
Area：Zhejiang
Address：Zhejiang
Website：http://www.tsbestmould.com/ http://mould.xlmtc8.com/
1. Product Introduction
Feature:
● Long mould life
● Save on raw materials and reduce costs
● Professional technical support
Advantage:
● We provide high precision, efficient mould and fast delivery.
● Professional technical support
● Our employees have rich mould experience and skilled technicians.
2. Product Specification of Plastic auto front bumper mould
Automobile bumper mold | |
Mould Name |
Plastic auto front bumper mould |
Mould Cavity |
1 cavities |
Mould size |
According the sample size |
Mould Material |
45#, P20, H13, 718, 2738, NAK80, S136, etc. |
Mould Life |
300,000 shots |
Runner System |
Hot runner |
Ejection system |
Hydraulic Cylinder |
Mould Running |
Automatically |
Design software |
UG, PROE, CAD, etc. |
Plastic material |
PP |
Process Machine |
CNC, High Speed Carve, EDM, Wire Cut, Driller, Grinder, fly cutter,etc. |
Package |
Wooden Case/pallet |
3. Product Application
4. Mold Flow Analysis
Use the data simulation software to complete the simulation of injection molding through the computer, simulate the injection process of the mold, and generate some data results. Use these results to evaluate the feasibility of the mold program and improve the mold design program and product design program.
5. Inspection Tools
TS moulds are imported from reputable companies abroad.Uddeholm in Sweden， Thyssen in Germany.All these companies have large stocks in China for immediate delivery.They supply us with steel certificates of quality， which in turn we pass on to our customers.
6. Mould Manufacturing Standards
1) Mould external gauge
● Mold accessories have an impact on the mold lifting and storage, such as installation below the leakage of the oil cylinder, water nozzle, pre-reset roof, should be supported column protection.
● Push rod, the top piece of ejection mechanism such as interference and slider, a forced reset institutions, roof has reset the switch.
2) Ejection reset, Pull core and pick up
● Slide core-pulling generally USES oblique guide column, whose Angle is 2 -- 3 degrees less than that of the locking surface of slide block.
● All mandrel and core have stop position and number.
3) Cooling
● All easy to heat set piece, inclined top, slide block in the permission must be plant cooling water.
● Before the cooling water is shipped out of the mold, each pair of molds shall be tested with the air gauge, and can be shipped out without air leakage.
4) General pouring system (excluding hot runner)
● Ball head drawing rod is fixed reliably, can be pressed under the positioning ring, can be fixed with headless screw, can also be pressed with the plate.
● At point gate mold before a small bump, die after a pit should be appropriate.
5) Hot runner system
● Collector plate and template this has heat insulation pad heat insulation, available asbestos mesh, stainless steel, etc.
6) Molding parts, parting surface and exhaust slot
● Cavity, parting surface must be wiped clean.
● No defects such as inverted and chamfering are found in the upper and lower molding parts.
7) Packaging
● Mould cavity should be sprayed with anti-rust oil.
7. Our Working Environment
A whole set of production lines :efficient, precise processing and testing equipment, including Matched Mold Machine, Deep Hole Drilling Machine, CNC Milling Machine, Drilling Machine,
Grinding Machine, Wire Cutting Machine, EDM, Precise Engraving Machine, Lathe Planning Machine ,Fly Cutter Machine and so on.
8. Product Qualification Of Mould
Our Factory
●Mould quality is the key to maintaining a cooperative relationship with customers.
●We are in pre-sale, sale After sales, there is a complete system to protect the rights and interests of customer
Processing Equipment
9. Delivery, Shipping and Serving
10. FAQ
Q1. What percentage of die exits are there?
A. 80% of our molds are exported to Canada, Europe, Japan
and Mexico, Russia, Southeast Asia, Africa, the Middle East and other countries.
Q2.When can I get the price of the plastic injection molding?
A:We usually quote within 24 hours after we got your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
Q3. How can I get the accurate price of the plastic injection molding?
A:There are some basic specs we need to know for price calculate, that are: 3D drawings in STP,IGS,X-T format are avaialble, Please suggest us your quantity too.
Q4. Are You A Trading Company Or A Manufacturer?
A: We are a manufacturer more than 10 years in Taizhou.
http://www.tsbestmould.com/
